Kædetilbehør

Kædetilbehør

Master Link M GrabiQ

GRM
Løfteringe til kæde, wire gjord og rundsling. * Hvis den skal bruges som kæde, så check tilsvarende værdier i WLL tabellen i henhold til EN818-4. ** Dimensioner L og E er ikke i henhold til En1677-4. Tryk her for at blive kontaktet af vores konsulent
For 1-, 2-, 3- and 4-leg slings. 3- and 4-leg chain slings require CLD / CGD Tryk her for at blive kontaktet af vores konsulent
Designed for crane hooks, DIN 15401 MAX. 3- and 4 leg chain slings require CLD/CGD Tryk her for at blive kontaktet af vores konsulent
Specialkroge og beslag

Gribe krog OG EN 1677-1

Not for use with Berglok. Grade 8 No reduction of working load limit, thanks to supporting lugs on either side of hook to prevent chain link deformation. Alle dimensioner i mmTryk her for at blive kontaktet af vores konsulent
Grade 8 Electrically insulated, lubricated, sealed roller bearing swivel. Fully rotational even at maximum load. Tested to resist 1000 V. Suitable for protection of overhead cranes during welding operations on suspended loads.* uninsulated alle dimensioner i mm.Tryk her for at blive kontaktet af vores konsulent
Kædetilbehør

Låsepin SKA

SKA locking set for coupling links G, consists of load pin and bush.Tryk her for at blive kontaktet af vores konsulent
Kædetilbehør

Master Link D

The loadbearing width must be at least 0.5 x ETryk her for at blive kontaktet af vores konsulent
Kædetilbehør

Løfteøje ELP

** In case of 1-leg application where loading is limited to straight loading in the direction of thread (no bending force) it is possible to use ELP with four times higher WLL. Note! Threaded depths need to be at least 1xM for steel, 1,25x M for cast iron and 2xM for aluminium alloy.Tryk her for at blive kontaktet af vores konsulent
Product added to wishlist
Product added to compare.

Vi anvender kun cookies til funktioner på siden, for at forbedre din brugeroplevese.